Note:
NO SIM is needed to unlock the phone.
After phone is unlocked, remove the battery, insert SIM as
desired and re-insert the battery.
Phone MUST be restarted to use the new SIM card.
1) Power on
2) Go to Settings
3) Go to Options
4) Go to Advanced Options
5) Go to Sim Card
6) HOLD ALT and press: mep2 (Please note that you will NOT see
what you type on the screen) *
7) It will ask you for the unlock code. Enter it and then press
trackball to confirm and your phone is unlocked!
* If your phone is a 9700 or 9000 that requires a second code
(ie.Bell), please repeat until step 6 and press mep4 to enter the
second code.
* Put your phone into GSM mode first, then when you press
mepd, you will get a prompt
9650 Troubleshooting for signal issues:
1. Go to Settings, then Manage Connections, then Mobile Network
Options and set the Network Technology to GSM/UMTS
2. Set Network Mode to 3G & 2G.
3. Press the Back Arrow Button once to exit and save settings.
4. Inside the Manage Connections, set Mobile Network to on.
5. Return to the main screen by pressing End Call and you should
see your phone getting signal
6. As a reminder, if you ever remove the SIM card from your
phone, you will need to set the Network Technology as GSM/UMTS
again
0 comments:
Post a Comment
Sign-in to comment
Note: Only a member of this blog may post a comment.