Starting
Like all electronic devices, the computer has an ON-OFF switch to bring power into it. You will find either a pushbutton switch located on the front of the CPU housing, or a toggle switch located on the back of the CPU housing.
Chances are that the monitor and the computer
are not powered by the same switch. It the monitor has an ON-OFF switch,
it should be on before the CPU is brought to life. The same is true for
any peripherals that the computer will be using. It is best to have them
turned on so that the computer can find them as it runs through its start up
instructions.
NAIJA SOFTWARE CHEATS
The operating system of a modern PC is very
complex and may take over a minute or two to completely prepare itself for
use. Be patient. Once the computer has completed the startup
procedure, it is ready to take orders from its master....you! Most of
what you will do with the computer after it starts can be accessed using the
"Start" button
at the lower left
corner of the screen (in Windows 95).
Stopping
When you are ready to stop using the
computer, you must take it through a shutdown procedure. Fortunately,
this only involves selecting the "Start" button and choosing the
lowest selection on the menu. . ."Shutdown". The following
dialogue screen will appear:
Wait for the computer to complete its
internal shutdown instructions before switching off the power.
NAIJA SOFTWARE CHEATS
0 comments:
Post a Comment
Sign-in to comment
Note: Only a member of this blog may post a comment.